![]() ![]() Download Jinka goldcut jk721 user Download. C7770-60276 What other items of suppliers are 361, T. Supported Vinyl Cutters - by VinylMaster. Artcut traial software#Plotter Controller by Graphtec Corporation and from the software available anywhere! ![]() If you have followed these instructions and are still having problems setting up your GoldCut vinyl cutter, please contact our technical support for help. Artcut traial install#Note: If there is a problem communicating with the cutter on Mac, it’s possible you may need to install the Mac driver for the USB to Serial Adapter with FTDI Chipset. Before we send the design to the GoldCut JK721 cutter, be sure the Model is set to “JK”, the connection type is “USB” and that you have the “GoldCut JK Series” port selected. If your cutter came with a pen, you might also want to insert it and load just a regular piece of paper to begin testing with.Ĭlick on the 'Cutter' icon from the toolbar to open the Cut Settings window. Be sure your GoldCut cutter’s pressure/force is to 100, and the speed set to about 500. Click the 'Add to list' and then click 'Done'.Īdd some basic artwork to your workspace. In the Manage My Cutters screen, from the Company/Brand drop-down menu select 'Goldcut' brand. Go to the Cutter menu, Select My Cutter then Manage Cutters. To use the Goldcut Vinyl Cutter via Easy Cut Studio for Mac, we first have to identify the machine you will be using. (If you don’t need the extra extension from the RS232 serial cable then you can just connect the serial end of the adapter directly to the cutter). Connect the serial end of the adapter to the other end of the RS232 serial cable and connect the USB end of the adapter to the computer USB port directly. And if you haven’t already got a standard RS232 serial cable with male and female connectors you might want one of them just to extend the cable length.Ĭonnect the RS232 serial cable to the COM port on the cutter. Don’t buy a cheaper adapter without the FTDI chipset, it won’t work. To connect, you need a USB to RS232 Serial DB9 Adapter with FTDI Chipset. The COM connection is also referred to as a ‘Serial’ or ‘Serial (COM)’ connection. So instead we need to connect via the COM port on the GoldCut cutter. But USB to serial with the FTDI chipset does work. When connecting the GoldCut to a Mac, a straightforward USB to USB connection from the cutter to the Mac computer does NOT usually work. The GoldCut cutter has two ports, USB and COM. USB Connection If you are connecting your cutter via a USB connection you must install the USB driver that came with your cutter first. If you are unsure if your cable is a RS 232-C cable, contact your plotter distributor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |